creat by art ? ul recognized file #e-326854 ? for surface mounted application ? metal to silicon junction, majority carrier conduction ? low power loss, high efficiency ? high current capability, low forward voltage drop ? high surge current capability ? guarding for overvoltage protection mbrs25xxct = specific device code g = green compound y = year ww = work week maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% symbol mbrs 2535 ct mbrs 2545 ct mbrs 2550 ct mbrs 2560 ct mbrs 2590 ct mbrs 25100 ct mbrs 25150 ct unit v rrm 35 45 50 60 90 100 150 v v rms 24 31 35 42 63 70 105 v v dc 35 45 50 60 90 100 150 v i rrm a 0.95 0.92 1.02 0.98 0.1 5 dv/dt v/us r jc o c/w t j o c t stg o c v 0.85 0.75 0.92 0.88 0.75 0.65 0.90 0.80 maximum instantaneous forward voltage (note 2) if=12.5a @ 25 if=12.5a @ 125 if=25.0a @ 25 if=25.0a @ 125 v f 0.60 0.55 0.82 0.73 maximum average forward rectified current @ t c =130 i f(av) 25 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 200 a ? plastic material used carriers underwriters laboratory classigication 94v-0 ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ? high temperature soldering guaranteed: 260 /10s at terminals ? green compound with suffix "g" on packing code & prefix "g" on datecode 15 0.2 10 0.1 7.5 0.2 ma maximum instantaneous reverse current t a =25 at rated dc blocking voltage per leg t a =125 - 65 to + 175 version:g11 note 1: 2.0us pulse width, f=1.0khz dimensions in inches and (millimeters) marking diagram peak reperitive reverse surge current (note 1) 1.0 0.5 mechanical data ? mounting torque:5 in.-lbs. max i frm 25 a maximum rms voltage maximum dc blocking voltage note 2: pulse test: 300us pulse width, 1% duty cycle storage temperature range type number peak repetitive forward current (rated v r , square wave, 20khz) at t c =130 voltage rate of change (rated v r ) mbrs2535ct - mbrs25150ct 25.0 amps. surface mount schottk y barrier rectifiers d 2 pak i r maximum repetitive peak reverse voltage ? terminal: pure tin plated, lead free, solderable per mil-std-750, method 2026 10000 - 65 to + 150 1.0 features ? case: jedec d 2 pak molded plastic ? mounting position: any operating temperature range ? polarity: as marked ? weight: 1.37 gram typical thermal resistance pb rohs compliance rohs compliance
version:g11 ratings and characteristic curves (mbrs2535ct thru mbrs25150ct) fig.1 forward current derating curve 0 5 10 15 20 25 30 50 60 70 80 90 100 110 120 130 140 150 case temperature ( o c) average forward current (a) resistive or inductive fig. 2 maximum non-repetitive forward surge current per leg 100 125 150 175 200 225 250 1 10 100 number of cycles at 60 hz peak forward surge current (a) 8.3ms single half sine-wave jedec method fig. 6 typical reverse characteristics per leg 0.0001 0.001 0.01 0.1 1 10 100 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage (%) instantaneous reverse current. (ma) ta=25 ta=125 MBRS2590CT-mbrs25100ct mbrs25150ct fig. 3 typical forward characterstics per leg 0.01 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1 1.2 forward voltage (v) instantaneous forward current (a) mbrs2535ct-mbrs2545ct mbrs2550ct-mbrs2560ct ta=25 ta=125 fig. 4 typical forward characterstics per leg 0.01 0.1 1 10 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 forward voltage (v) instantaneous forward current (a) MBRS2590CT-mbrs25100ct mbrs25150ct ta=25 ta=125 fig. 5 typical reverse characteristics per leg 0.001 0.01 0.1 1 10 100 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage (%) instantaneous reverse current. (ma) ta=25 ta=125 mbrs2535ct-mbrs2545ct mbrs2550ct-mbrs2560ct
ratings and characteristic curves (mbrs2535ct thru mbrs25150ct) version:g11 fig. 7 typical junction capacitance per leg 10 100 1000 10000 0.1 1 10 100 reverse voltage (v) junction capacitance a (pf) ta=25 f=1.0mhz vslg=50mvp mbrs2535ct-mbrs2560ct MBRS2590CT-mbrs25150ct fig. 8 typical transient thermal impedance per leg 0.1 1 10 100 0.01 0.1 1 10 100 t-pulse duration (s) transient thermal impedance a ( /w)
|
